English
Hindi

Question

Download Solution PDF

In leaf springs, the longest leaf is known as

This question was previously asked in
UKPSC JE Mechanical 2013 Official Paper I
Download PDF Attempt in App
View all UKPSC JE Papers >
  1. Upper leaf
  2. Lower leaf
  3. Master leaf
  4. None of these

Answer (Detailed Solution Below)

Option 3 : Master leaf
Free Tests
View all Free tests >
Free
UKPSC JE CE Full Test 1 (Paper I)
180 Qs. 360 Marks 180 Mins
Start Now

Detailed Solution

Download Solution PDF

The longest leaf known as the main leaf or master leaf has its ends formed in the shape of an eye through which the bolts are passed to secure the spring to its supports.

Download Solution PDF
Latest UKPSC JE Updates

Last updated on Mar 26, 2025

-> UKPSC JE Notification for 2025 will be out soon!

-> The total number of vacancies along with application dates will be mentioned in the notification.

-> The exam will be conducted to recruit Junior Engineers through Uttarakhand Public Service Commission. 

-> Candidates with an engineering diploma in the concerned field are eligible. 

-> The selection process includes a written exam and document verification. Prepare for the exam with UKPSC JE Previous Year Papers.

Exams Tests Super Practice

More Springs Questions

Q1.The type of spring used to absorb shocks and vibrations in vehicles is :
Q2.Identify whether the following statements related to springs are true or false. i) When two coil springs are in series, both the springs will carry equal load  ii) When two coil springs are connected in parallel, the stiffness of the composite spring is the sum of the stiffness of the two springs.
Q3.The stiffness of a spring is 20 N/cm. Calculate the work done to stretch the spring by 7 cm.
Q4.If there are two springs A and B of stiffness KA and KB respectively, and if KA > KB, then on application of the same force, work done is more in
Q5.If the mean coil diameter and wire diameter of a helical compression or tension spring are doubled, then the deflection of the spring under the same applied load will be
Q6.When a close coiled helical spring of mean diameter (D) is subjected to an axial load (w), the deflection of the spring is ((n) is number of coils and (d) is diameter of wire) :
Q7.Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be
Q8.The load required to produce a unit deflection in a spring is called
Q9.Two springs, S1 and S2, with mean diameters of 90 mm and 75 mm, respectively, are made up of two equal lengths of hardened steel wires of the same diameter. The ratio of the stiffness of S1 to that of S2 is: 
Q10.A leaf spring is an example of
Suggested Test Series
View All >
UKSSSC Group C (Patwari/Lekhpal/VDO/VPDO) Test Series 2025
148 Total Tests with 3 Free Tests
Start Free Test
Uttarakhand Combined State Civil/Upper Subordinate Services Examination 2025
38 Total Tests with   1 Free Tests
Start Free Test

More Strength of Materials Questions

Q1.What will be the nature of longitudinal stress in a thin closed cylinder containing hydrostatic fluid pressure?
Q2.A steel bar (E = 200E = 200, α = 12 × 10 − 6/°C) expands by 0.3 mm due to  a temperature increase. If the original length of the bar was 15 cm, what was the temperature rise?
Q3.In the Charpy impact test, the specimen is typically:
Q4.Which of the following represents the polar modulus of the hollow shaft? [ If Do = External diameter and Di = Internal diameter ]
Q5.A simply supported beam with a span length of 5 m carries a moment of 20 N-m (counterclockwise direction) at the middle of the beam. What will the value of reactions be at both the ends of the beam?
Q6.What will be the shape of the bending moment diagram for a cantilever beam carrying a uniformly distributed load throughout its length?
Q7.If a component has a Factor of Safety (FoS) of 1.0, what does it indicate?
Q8.If elastic strength increases 3 times, then Proof Resilience:
Q9.If the external diameter of a hollow shaft is three times greater than its internal diameter, what is the ratio of its torque-carrying capacity compared to that of a solid shaft of identical material and the same outer diameter?
Q10.For a thin planar ring of radius ‘r’ mm and thickness ‘t’ mm, its radius of gyration about the polar axis in mm is:
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
support@testbook.com
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Hot Links： teen patti wealth teen patti all games teen patti game teen patti bonus teen patti master app